Light control modules
"more safety"
Determine when it is bright. Here you get an overview to what your vehicle can be extended.

This feature allows by an unique tap to flash the indicators 3 to 4 times.

During night trips the fog lights turn on if you use the indicators. Through that the curve is better illuminated. If you stop the indicators, the front fog lamps are switched off automatically after a few seconds .This function is only below of 40 km/h active to avoid a senseless function druing a lane change at higher speeds.

The daytime light turns always on once started the engine of the vehicle. As daytime light, use dimmed beam, front fog lamps, back lights or any combination thereof. For example, fog lamps and tail lights. In some European countries driving light is already duty and helps to prevent accidents.

The coming home function is active if you turn of the light after removal of the ignition key.
The light turs off after a programmalbe timeframe from 15 to 75 seconds. Coming home lighting is possible for the following lights or any combination thereof: Indicators, full beam, low beam, parking light, fog lights and back lights.

This feature helps you to find your vehicle on a dark parking lot and also like coming home function, you find your way safe. Location light is active when you press the open button on your standard remote control key. You can use the following lights or any combination of these: Indicators, full beam, low beam, parking light, fog lights and back lights. The location light turns off automatically after a period which is selectable from 15 to 75 seconds.

After locking the car with the key remote control switch on low beam, fog lamps, or both together for one over the display menu programmable time.

You acknowledged the opening or closing of the vehicle with a short beep. When you open 1 sound when close 2 tones. The user can set that this function active with opening, locking, or both.

This feature allows to open or close the sunroof of your vehicle or the window by pressing on the original remote control . Which windows respond to this function that can be programmed.
Board computer modules
With the board computer modules it is possible to show the following additional information at the display of the vehicle:
- Battery voltage
- Speed (km/h or in mph)
- Engine speed in 100m/s steps
- Coolant temperature
- Oil temperature
- Route count
- Trip time